Become a MacRumors Supporter for $50/year with no ads, ability to filter front page stories, and private forums.
Does this fix (for the AC BaseStations) provide any updates for IPv6 issues with cable providers? the current "fix" is to disable IPv6 and use Link-local which sort of works but I get random speed reductions.


It is intended to fix that issue. If it doesn't contact AppleCare.
[doublepost=1464335573][/doublepost]
last time I updated the firmware it bricked all devices and what pissed me off, that airport express B,g was not supported anymore.
Why would you still be using that device? They're so slow
[doublepost=1464335740][/doublepost]
I forgot to mention (a few posts ago) I'm using COX as my ISP.
Yes, this latest update to the routers was intended to fix the issue with Cox Communications and IPv6. You should be able to set Configure IPv6 back to Automatically. But if it doesn't work for you, contact AppleCare
 
I don't use "extend a wireless network" as I only have one wireless access point (airport) that our laptops connect to so I am not sure what the difference is.

Bridge mode means that the wireless access point (airport) does not act on any of the connections. It just receives wireless connections and forwards the data to the ethernet port. No firewall, no DHCP server, no ARP resolution, no DNS lookup, etc. This does seem to work fine.

I have 3 airports on my network. A current AirPort Extreme, a previous generation extreme (running bridge mode off a Cisco 887 that also handles dhcp) and an airport express.

The new extreme and the old express are extending the wireless neteork.

I've rebooted them twice in the last 12 months - once to replace my old extreme with the new one and repurpose the old. And for this update....
 
Anyone who had to switch settings from auto to local only switch back yet without any issues?
Yes. If you have any problems after changing back to auto, contact AppleCare
[doublepost=1464336128][/doublepost]
Nice,
I'm holding off, for this very reason - good luck

There's really no reason to wait. If you, or anyone else received an error when updating, first restart AirPort Utility and verify that the base station didn't actually update. It's quite possible it did, but had an error reading settings and just needed to restart AirPort Utility. If it truly didn't update, restart the Base Station and restart the modem and try again. It'll update just fine.
[doublepost=1464336202][/doublepost]
Holy cow...

Cox + Surfboard + AC AirPort Extreme here. I've been experiencing the intermittent connection issues described by others and was about to go completely insane. It dropped communication again tonight during a Netflix binge and I almost lost it. Restarted the AE per the usual and saw the update. Really hoping it resolves whatever issues have been plaguing us all.

If nothing else, it is oddly reassuring to know that I'm not the only one. I appreciate the little support group we've got going here, hah.

This has been an ongoing issue for several months. You should have just called AppleCare and they would have taken care of it months ago. As far as the update, it is intended to fix the issue. If it does not, contact AppleCare.
[doublepost=1464336276][/doublepost]
I wonder why my time capsule and my airport express have red circles with "1" next to them in the airport utility but the update-button is greyed out... aka can't update. Anyone?
Restart the AirPort devices and try again
[doublepost=1464336454][/doublepost]I see so many people posting about having issues with their AirPort routers for months and not many of the posters have mentioned calling AppleCare. If you have issues with your AirPort devices, contact AppleCare. They'll help you take care of the issue.
 
Last edited:
I saw that, and I assumed one of the ports is needed to connect the router to the cable modem, so that leaves me with a single port, which for 199 dollars is totally inadequate.

I have connected a 8-port gigabit switch to that single ethernet port - works like a charm - same setup with Airport
 
There's really no reason to wait.
I disagree, why mess with my internet access with an update that may be buggy. I'm not saying it is buggy, but if my setup is stable and performance is good now, why mess with success. Wait until more reports on the stability and quality of the update start rolling out.

Its not just a matter of having issues updating the firmware, its the fact that the new version may have bugs. I'd rather not be on the bleeding edge, when it comes to updating my router.
 
The jitter is just part of the problem. At the end of the day, AirPlay via AirPort Express is prone to dropouts. I could be in the same room as the AirPort Extreme/AirPort Express, DAC and still get drop outs. I've tolerated AirPlay because I was able to get a first-gen for cheap and use with my DAC but with summer arriving, I have time to do a bit of an upgrade to my stereo system so I may finally ditch AirPlay and just go with a Sonos Connect to eliminate dropouts completely.

You might try it with an ethernet. I've used AE with Airport express for airplay and seems to work great. Drop outs likely are Wifi caused.
 
The problem I have is that my internet speeds occasionally drop to <1mbps and require a restart of my SB6141 to restore speeds. I've replaced the SB6141 with no improvement. Does this sound like the known problem with the AE ac?

This is a problem w/ Motorola's hardware. I had the same modem w/ the same problem. That modem is cancer. Bought a Zoom modem & been fine ever since
 
  • Like
Reactions: tennisproha
I have had constant problems with my Airports. The most obvious is that when certain devices (usually newer iPads combined with an older iPad or Macbook) join the network all hell breaks loose. I literally have to restart every Airport (I have setup several with an extended network) and every device to get some devices back on the network. Who knows if this update makes a difference and it blows me away that Apple pretended nothing has been wrong with these sh*tboxes for at least 3 years. I have setup brand new Airports for my parents and they have had the same issues. Certain new devices (I assume newer chipsets for WiFi etc.) create havoc for their network as well.

I have never seen a bullet proof home WiFi network, no matter which Brand and config/firmware I use, but since I am using only Apple tech for the Router/WiFi and ALL of he devices, you would think they would all work together.

And before there are any typical comments, I am fairly proficient in setting up simple to medium complex networks.
 
I have 3 airports on my network. A current AirPort Extreme, a previous generation extreme (running bridge mode off a Cisco 887 that also handles dhcp) and an airport express.

The new extreme and the old express are extending the wireless neteork.

I've rebooted them twice in the last 12 months - once to replace my old extreme with the new one and repurpose the old. And for this update....

Both our airport express's died in the last 12 months and have not been replaced. We had hopped to get into the Apple TV ecosystem, but since it is so closed we are not. Since we cannot run any Apple TV stuff on our Minis we are considering moving completely away from Apple for non-phone media use. As a long time Apple user we hate this move, but Apple has moved away from us by abandoning the Mini (by using lackluster tech), and forcing the Apple TV into a closed ecosystem (void of 4K and personal media recording and management). A media center is not a phone and we don't need to protect the network, so we don't need and won't use a closed system.
 
You might try it with an ethernet. I've used AE with Airport express for airplay and seems to work great. Drop outs likely are Wifi caused.

Connecting via ethernet wouldn't matter because unless you're connecting your Mac through ethernet, there's always going to connection through Wifi (iPad/iPhone/Mac w/iTunes). If I hard wire, I might as well connect my Mac directly to the DAC but that defeats the purpose of AirPlay and I would just use Apple Remote.
 
. . . . I am fairly proficient in setting up simple to medium complex networks.

My experience is that it is not usually about setup but is about hardware and cables. Unfortunately, Apple is not very wise about networking. My network started settling down as soon as I got rid of Apple networking stuff. I now use one Apple product, an older airport extreme in bridge mode. The biggest changed happened when I put in a small office firewall and a managed switch and eliminated my ISPs firewall and switches. The managed switch allows me to monitor all connections and view error rates. Using this I can find and eliminate any wiring/connection problems. The switches and wireless access points available at the big box stores or from the ISPs are just not worth it. They tend to cut a lot of corners in order to be cheap.
[doublepost=1464368758][/doublepost]
. . . . I have time to do a bit of an upgrade to my stereo system so I may finally ditch AirPlay and just go with a Sonos Connect to eliminate dropouts completely.

Drop outs may have nothing to do with your equipment/network, it could very well be your neighbors equipment behaving poorly.
 
Drop outs may have nothing to do with your equipment/network, it could very well be your neighbors equipment behaving poorly.

Perhaps but still doesn't ignore the fact that if I use AirPlay, there's a chance I will get dropouts regardless if its my network or not. With Sonos, as a dedicated music system and environment, I experience no such thing. I might have to pay a bit of a premium for some components, but building a stereo system isn't a cheap hobby to being with.
 
How do I check to see if my ISP supports ipv6? Is that link provided earlier checks to see if my ISP supports it? Or do I have to turn on ipv6 first on my AX?
 
Connecting via ethernet wouldn't matter because unless you're connecting your Mac through ethernet, there's always going to connection through Wifi (iPad/iPhone/Mac w/iTunes). If I hard wire, I might as well connect my Mac directly to the DAC but that defeats the purpose of AirPlay and I would just use Apple Remote.

Depends on setup. My desktop server is wired to the extreme, and my stereo is connected to my airport express via Wi-Fi. Works great. I also set up the express to only use 5ghZ Wi-Fi with the airport extreme.
 
Depends on setup. My desktop server is wired to the extreme, and my stereo is connected to my airport express via Wi-Fi. Works great. I also set up the express to only use 5ghZ Wi-Fi with the airport extreme.

Which is one of many setup configurations. Unless your AirPort Express is connected to your AirPort Extreme via ethernet, you're still going over Wi-fi and risk potential dropouts. The AirPort is still a solid device but when it comes to audio, there are much better and reliable options. In my case, the AirPlay via AirPort Express isn't the best option for my setup. There is nothing worse when you're hosting with music playing and suddenly music jumps in and out.
 
Me too, but I run them bridge mode. But they are a dark spot that I despise when I have problems. Unlike most, I have managed switches and firewalls. So I can normally work around any issues, but its a pain that is not necessary.

I have a very similar setup with pfSense at the core and a 5th gen AEX in bridged mode + 802.1x. I've been considering replacing it with a Ubiquiti AP since it seems to kernel panic and reboot at random times throughout the month. I'm hoping this last update helps address this. I've been quite happy with the AEX's performance and coverage...would hate to ditch it because it won't stay stable.
 
My Airports have been rock solid (Time Capsules and expresses). I just wish there were more features, like being able to block selected clients from the internet and being able to see IP info for all clients, not just wireless clients. Oh, and faster drive access, and USB 3.0 (if not 3.1).
 
I've had great luck with my Apple AirPort Extreme kit. I get an especially strong signal from the new AE Base Station with it's directional antenna.
 
My experience is that it is not usually about setup but is about hardware and cables. Unfortunately, Apple is not very wise about networking. My network started settling down as soon as I got rid of Apple networking stuff. I now use one Apple product, an older airport extreme in bridge mode. The biggest changed happened when I put in a small office firewall and a managed switch and eliminated my ISPs firewall and switches. The managed switch allows me to monitor all connections and view error rates. Using this I can find and eliminate any wiring/connection problems. The switches and wireless access points available at the big box stores or from the ISPs are just not worth it. They tend to cut a lot of corners in order to be cheap.
[doublepost=1464368758][/doublepost]

Drop outs may have nothing to do with your equipment/network, it could very well be your neighbors equipment behaving poorly.
I'm interested, which Extreme are you using (Gen) and what are you bridging with? I've tried to extend my Extreme with other brand routers with bad results. I'm curious... I would love to find a cheap way.
 
Register on MacRumors! This sidebar will go away, and you'll see fewer ads.