Sidebar Sidebar
Become a MacRumors Supporter for $50/year with no ads, ability to filter front page stories, and private forums.

iPhone X Screen Protectors/Skins [MERGED]

lionmanpt said:
Can anyone tell me if the iCarez Red works fine with the apple cases ? Thanks !
Click to expand...
I would think so, I have the white case 3D one and it’s a bit larger and harder to get perfect without bubbles but they’ve seemed to disappear after a couple days and some hard rubbing. Looks pretty much perfect now I use Apple cases and a Spigen Crystal Hybrid. I have the red box ones on order as well just in case.
 
I wonder how the icarez with full covered glass affects face id in very dark room. imos and probably other brands that have “notch” will be ok. But how about the ones that cover the sensor? Because according to apple the sensor projects infra red lights to map your face. The light will bounce back if you cover it with glass. The same for the flash in your back camera. If you have a camera glass protector, when you use flash, it’s very white and washout.. can someone test this - face id in a bery dark room?

Also when calling, the proximity sensor - if blocked - will remain either screen off even if you pull away the phone in your face....


My face ID works almost 99% of the time during daylight and 100% during the dark esp in a very dark room.
 
https://goo.gl/qDCcsL

Just bought the above case. Spigen tough armor. What screen protectors are good for that? Also how are the screen protectors on amazon? I read reviews and the reviews say a lot are fake reviews and unverified purchases. I’m hesitant. Any suggestions?
 
Fyi, an updated version of the iCarez Glass Protectors is now available. 2.5D and 3D glass now comes with an installation tray guide. I'm waiting on delivery for the new version.
 
ducatiti said:
Fyi, an updated version of the iCarez Glass Protectors is now available. 2.5D and 3D glass now comes with an installation tray guide. I'm waiting on delivery for the new version.
Click to expand...

Are you going to try the 3D or 2.5D?
 
Tulipo said:
Are you going to try the 3D or 2.5D?
Click to expand...

I currently have the 2.5D and will stick with that. I like the fact that they fit with my cases so far. I don't want a full coverage 3D since I will be using my phone with cases. If you are going nude, go for the 3D.
[doublepost=1512499246][/doublepost]My replacement Zagg glass came in.. Although I don't think this will be ever be used again, but good to know I have a glass protector with a notch as a spare.
 
ducatiti said:
I currently have the 2.5D and will stick with that. I like the fact that they fit with my cases so far. I don't want a full coverage 3D since I will be using my phone with cases. If you are going nude, go for the 3D.
Click to expand...
I use the 3D perfectly with a Tozo ultra slim case. Just use it with a case that doesn’t have a lip.
 
ducatiti said:
How about the 3D glass, will it fit with an Apple Leather Case?
Click to expand...
Yes, works just fine.
[doublepost=1512512279][/doublepost]
zz_nosa_r said:
I wonder how the icarez with full covered glass affects face id in very dark room. imos and probably other brands that have “notch” will be ok. But how about the ones that cover the sensor? Because according to apple the sensor projects infra red lights to map your face. The light will bounce back if you cover it with glass. The same for the flash in your back camera. If you have a camera glass protector, when you use flash, it’s very white and washout.. can someone test this - face id in a bery dark room?

Also when calling, the proximity sensor - if blocked - will remain either screen off even if you pull away the phone in your face....


My face ID works almost 99% of the time during daylight and 100% during the dark esp in a very dark room.
Click to expand...
The ICarez full screen 3D protector works fine in all light settings, even in full darkness at least in my experience so far, zero issues.
 
Breezygirl said:
Yes, works just fine.
[doublepost=1512512279][/doublepost]
The ICarez full screen 3D protector works fine in all light settings, even in full darkness at least in my experience so far, zero issues.
Click to expand...

Thanks for confirming. Have you tried any cases with the 3D versions? I'm surprised that it fits the Apple Case. You must have installed it perfectly.
 
ducatiti said:
Thanks for confirming. Have you tried any cases with the 3D versions? I'm surprised that it fits the Apple Case. You must have installed it perfectly.
Click to expand...
Honestly it was really hard for me to get the 3D one perfect, always had a bubble or two after applying. Eventually the bubbles disappeared on their own in a couple days. No problems with the 3D and my Apple cases (leather and silicon) or my Spigen Ulta Hybrid and that’s a very very tight case.
 
gahig ulo said:
the icarez problem is some edges looks deeper esp viewing like this sites even when its perfectly installed.i think this a general problem if there is a black outline like icarez
Click to expand...

I’ve been trying to figure out how to phrase it and that’s spot on. I had mine installed perfectly but noticed that the screen was VERY slightly masked by the black border when looking at it from any angle other than perfectly front and center. I also didn’t like that the black border added extra depth and made it feel like there was some distance between the surface and the screen.

The icarez 2.5D is pretty darn close to being perfect... I would have kept it on but my OCD got the best of me.
 
  • Like
Reactions: oserere
Just installed the iCarez and I couldn’t be happier. Easy install and looks excellent. For the price and the fact that it comes as a 2pack, you can’t beat it IMO.
 
matthew.murillo951 said:
Just installed the iCarez and I couldn’t be happier. Easy install and looks excellent. For the price and the fact that it comes as a 2pack, you can’t beat it IMO.
Click to expand...

I have terrible result with iCarez. Lots of bubbles everywhere small and large. Tried to rub the screen to push them out, they disappeared but then came back a few minutes later. I bought the red box version.

https://lh6.googleusercontent.com/_...Clv8TMGkgSdK5L0v8c5HMUV4Lyng-1P=w1142-h739-rw
 
Doh! Ordered the wrong one.

Can someone please link to the full coverage iCarez protector?
 

Attachments

  • F80DD23B-624F-4C3E-BBF7-1AAC86E22E14.jpeg
    F80DD23B-624F-4C3E-BBF7-1AAC86E22E14.jpeg
    712 KB · Views: 188
dojoman said:
I have terrible result with iCarez. Lots of bubbles everywhere small and large. Tried to rub the screen to push them out, they disappeared but then came back a few minutes later. I bought the red box version.

https://lh6.googleusercontent.com/_...Clv8TMGkgSdK5L0v8c5HMUV4Lyng-1P=w1142-h739-rw
Click to expand...

I've installed a couple and yes, there were be bubbles on the cornders
boto said:
They just released an updated version with a tray installation.
https://www.amazon.com/iCarez-Cover...-10&keywords=icarez+iphone+x+screen+protector
Click to expand...

I just ordered these and expect them to arrive on Friday.
 
As an Amazon Associate, MacRumors earns a commission from qualifying purchases made through links in this post.
You must log in or register to reply here.
Register on MacRumors! This sidebar will go away, and you'll see fewer ads.
Top Bottom
Back